10
– – – – – –
SEt UP
PrCESS
LOCAL
bALNCE
rEMOtE
or
dUAL
POStn
F–bACK
rEGLtr
dAtA
or
or
– – – – – –
…4.2
Set Points Page
Set Point Type Selection
This frame displays the current set point type, or
bALNCE
and value – see
Set Point Type Selection
frame in the
Operating Page
– see
Section 5.2 of the Operating Guide.
Upper Display – displays the set point type, or
bALNCE
:
LOCAL
–
Local set point
bALNCE
–
Balance, the difference between the
Local and Remote (or Dual) set point
values
rEMOtE
–
Remote set point on controllers with
Remote set point facility
dUAL
–
Dual set point
Lower Display – displays the value of the set point type
shown in the upper display, but if the set point type is
changed from Local to Remote (or Dual) the display shows
the difference (
bALNCE
) between the Local set point
value and the Remote (or Dual) set point value.
When Remote set point is selected and if Remote set point
tracking is enabled the Local set point value tracks the
Remote set point value. The Local set point limits do not
apply in this mode. If the Local set point is outside of its
limits when Local set point type is re-selected, it can only
be adjusted towards its limits. Once within these limits,
they apply as normal.
Press
to select
LOCAL
,
bALNCE
,
rEMOtE
(or
dUAL
).
rEMOtE
and
dUAL
are dependent on the
selection made at
Second Set Point Type
parameter.
Return to the top of
Set Points Page
or advance to the next
page.
…4
CONFIGURATION
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
