ABB C310, Руководство по программированию

Страница: 34 / 58

31
PF–INd
no
F–MSGE
no
AUtMAN
on
HEAtCL
…4.10 Set Up Control Page
4 CONFIGURATION…
Power Fail
Mode
Mode on
Power Down
Mode on
Power Up
Control Output (Valve Position
on Power Up
Auto
Auto Auto
Integral component of the control output is preset to
give bumpless operation at power-up at the value set
in the Auto-to-Auto frame.
Manual Auto
Integral component of the control output is preset to
give bumpless operation at power-up at the value set
in the Manual-to-Auto frame (or LAST)
Manual
Auto Manual Value set in Auto-to-Manual Output frame (or LAST)
Manual Manual
Value set in Manual-to-Manual Output frame or
output value prior to power-down (if LAST selected)
Last
Auto Auto
Integral component of the control output is preset to
give bumpless operation at power-up at the value set
in the Auto-to-Auto frame (or LAST)
Manual Manual
Value set in Manual-to-Manual Output frame or
output value prior to power-down (if LAST selected)
Table 4.3 Power-up and Power-down Control Modes
Power Fail Indication Enable
If the indication is enabled,
LINE FAILEd is displayed in
the
Operating Page
following a power failure.
Select YES to enable or no to disable indication.
Failure Message
The following
Operating Page
Failure messages can be
enabled or disabled – see Section 5.2 of Operating Guide.
F–INPt – process input failure
F–rSPt – remote set point failure
F–POSN – position feedback failure
Select YES to enable or no to disable.
Auto/Manual Switch Enable/Disable
Select
on
to enable, or
OFF
to disable.
If
HEAtCL
is selected at
Control Mode
, advance to
Control
Action (Heat)
, otherwise advance to
Output High Limit.
Continued on next page.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com