abaco systems PPC11A Скачать руководство пользователя страница 109

Страница: 109 / 159

Publication No. PPC11A-HRM/1

Control and Status Registers 109

5.51.5 Watchdog Kick Register (Offset 0x704)

Any write to this register kicks the Watchdog.

5.51.6 Watchdog Interrupt Acknowledge Register (Offset 0x705)

Any write to this register acknowledges the Watchdog warning interrupt.

5.51.7 Watchdog Main Counter Low Byte Register (Offset 0x706)

This register returns the value of the low byte of the main counter, and latches the

current value of the high byte for reading later.

5.51.8

Watchdog Main Counter High Byte Register (Offset 0x707)

This register returns the value of the high byte of the main counter at the instant
when the main counter low byte register was last read.

NOTE

Software must read the low byte and then the high byte in that order.

5.51.9 Watchdog Warning Timer Bits 8:1 Register (Offset 0x708)

This register returns the value of bits 8:1 of the 17-bit warning timer, and latches the

current value of bits 16:9 for reading later.

Bit 0 of the 17-bit warning timer cannot be read.

5.51.10

Watchdog Warning Timer Bits 16:9 Register (Offset 0x709)

This register returns the value of bits 16:9 of the 17-bit warning timer at the instant
when the warning timer low byte register was last read.

NOTE

Software must read the low register and then the high register in that order.

The Warning Timer Status bit in the

Watchdog Status Register

indicates whether this

timer is running.

NOTE

The warning timer is a down counter. It may be treated as a 16-bit timer counting at half the rate of the

main counter.

Содержание PPC11A
































































































































































Результаты поиска

Содержание PPC11A

Отзывы:

Похожие инструкции для PPC11A

Бренды по названию

Популярные бренды

abaco systems PPC11A, Справочник по аппаратуре

Результаты поиска

Содержание PPC11A

Отзывы:

Похожие инструкции для PPC11A

Бренды по названию

Популярные бренды