manualshive.com logo in svg

abaco systems CPCI-7806, Справочник по аппаратуре, Страница: 6 / 95

Поделиться
Скачать
abaco systems CPCI-7806 Скачать руководство пользователя страница 6

6 CPCI-7806/CPCI-7806RC Pentium/Celeron M Universal CompactPCI Single Board Computer

Publication No. 500-657806-000 Rev. G

FCC Part 15

This device complies with Part 15 of the FCC Rules. Operation is subject to the 
following two conditions: (1) this device may not cause harmful interference, and 
(2) this device must accept any interference received, including interference that 
may cause undesired operation.

FCC Class A

NOTE

This equipment has been tested and found to comply with the limits for a Class A digital 

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable 

protection against harmful interference when the equipment is operated in a commercial 

environment. This equipment generates, uses, and can radiate radio frequency energy and, if 

not installed and used in accordance with the instruction manual, may cause harmful 

interference to radio communications. Operation of this equipment in a residential area is 

likely to cause harmful interference in which case the user will be required to correct the 

interference at his own expense.

CAUTION

Changes or modifications not expressly approved by the party responsible for compliance 

could void the user’s authority to operate the equipment.

Canadian Regulations

The CPCI-7806/CPCI-7806RC Class A digital apparatus complies with Canadian 
ICES-003.

NOTE

Any equipment tested and found compliant with FCC Part 15 for unintentional radiators or 

EN55022 (previously CISPR 22) satisfy ICES-003.

Содержание CPCI-7806
































































































Отзывы:

Нет отзывов