IP P
HONE
FOR
MX-ONE™
111
6/1553-DBC 444 01 Uen B4 2014-03-26
18.3.2.1 Setting
the
Alert
Signal For Incoming Calls
To change the alert signal for incoming calls, do the following:
1.
Press .
2.
Select
Sounds
and press
Select
.
3.
Select
Alert
and press
Select
.
4.
Select
Alert 1st call
or
Alert 2nd and 3rd call
, and press
Select
.
5.
Select an alert type, and press
Set
.
The available alert types are described above.
Note:
If you wish to listen to an alert signal before selecting it, press
Play
. When you are done listening to a signal, press
Stop
.
18.4 Display
This section describes how to change the display brightness and how
long the display will be illuminated, that is, the brightness hold time.
18.4.1 Setting
the
Brightness
To modify the brightness hold time, do the following:
1.
Press .
2.
Select
Display
and press
Select
.
Press
Select
again to open the
Phone Brightness
window.
3.
Edit the
Intensity
and
Brightness Hold time
settings.
Periodic
The ring signal alerts periodically.
Delayed Periodic
There is a delay before the first ring signal. The
length of the delay can be changed by the
system administrator.
One Muted
The phone rings once, then the signal is muted.
Delayed One Muted
There is a delay before the ring signal. After one
ring, the signal is muted. The length of the delay
can be changed by the system administrator