Aastra 400 Series Скачать руководство пользователя страница 561 | Manualshive

Страница: 561 / 592

Aastra 400 Series Скачать руководство пользователя страница 561

Features

561

System functions and features as of R3.0

syd-0367/1.3 – R3.0 – 03.2013

Function Redkey

On each system phone one or more function keys can be configured as Redkeys.
Depending on the application an alarm can then be triggered, a heating system
switched on, a process controlled, etc., with the aid of the ATAS protocol on an ATAS
server. The message sent contains the user number and additional parameters
(max. 32 characters/digits).

• The configuration is set for each phone and can only be made via AMS.

• The function can be stored on any configurable keys of the system phones.

• Several keys on each phone can be configured as Redkeys.

• The Redkey function can be triggered regardless of the operating state (idle, di-

alling, call, ringing) of the system phone.

• If the Redkey is configured on a function key, a distinction can be made between

single and double click due to a different assignment of the number memories.

• Once a Redkey has been configured, it can only be reconfigured via AMS.

• The application on the ATAS server can acknowledge that a function has been

triggered by a Redkey by sending a message to the phone’s display (with or
without a prompt to acknowledge the message).

Redkey as function code

To be able to perform the Redkey function also on third-party terminals (analogue
terminals, SIP terminals etc.), a */# function code is available. Possible applications
are analogue terminals in retirement homes, door intercom systems, lift telephones
etc.

Tab. 377 Trigger Redkey function: Function

Function

Function code

Note

Trigger Redkey function

*73 <Parameter> #

The parameter can contain a maxi-
mum of 28 digits.

«
...
559
560
561
562
563
...
»

Содержание 400 Series

















































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов