Aastra 400 Series Скачать руководство пользователя страница 430 | Manualshive

Страница: 430 / 592

Aastra 400 Series Скачать руководство пользователя страница 430

Features

430

System functions and features as of R3.0

syd-0367/1.3 – R3.0 – 03.2013

Tab. 216 E-mail notification

Tab. 217 Mailbox recording capacity

Tab. 218 Greetings

Parameter

Value range

Remarks

Notification of a new voice mes-
sage

Yes

/

No

Newly recorded voice messages generate an e-mail
to the user’s email address and any additional email
destinations that may have been entered. The
parameter is configurable only if the user has a
valid e-mail address configured.

Attach voice message

Yes

/

No

An audio file with the recorded voice message is
also sent as an e-mail attachment.
Note: Audio files are only sent along too if the
codec is set to G.711.

Additional destinations (email
addresses)

<E-mail address 1,
E-mail address 2...>

E-mail notifications are sent to the user’s e-mail
address as standard. If the e-mail notifications are
to be sent to other destinations, enter the e-mail
addresses here. Separate the individual e-mail
addresses with a comma.

Parameter

Value range

Remarks

Max. capacity

<0..3600> sec.

Total recording time available for this mailbox (incl.
personal greetings).

Capacity used

<0..3600> sec.

Status display

Parameter

Value range

Remarks

Number of personal greetings

<0..3>

The global greeting (setting = 0) is automatically
activated if no personal greetings are recorded. If
no global greeting is available, the greeting is auto-
matically taken over by the audio guide.

Active greeting

<0..3>

Greeting 1, 2 or 3 can be selected as the active
greeting, where permitted. The greeting 0 corre-
sponds to the global greeting.

Max. recording time per greeting

<0..300> sec.

Applies only to personal greetings. For global
greetings the maximum length is defined in the file
management.

Codec greetings

<

G.711 (low compres-

sion)

/

G.729 (high

compression)

>

Choice of compression method:
G.711 = high call quality, requires more memory
G.729 = lower call quality, requires less memory

Recording after global greeting
enabled

Yes

/

No

Allows the caller to leave a voice message after the
global greeting.

Greeting name

<Name>

«
...
428
429
430
431
432
...
»

Содержание 400 Series

















































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов