Aastra 400 Series Скачать руководство пользователя страница 424 | Manualshive

Страница: 424 / 592

Aastra 400 Series Скачать руководство пользователя страница 424

Features

424

System functions and features as of R3.0

syd-0367/1.3 – R3.0 – 03.2013

•

Deflect to mailbox (with greeting)

The call is transferred to the user mailbox number entered in the field

Destina-

tion

. The mailbox’s active greeting is played back directly.

Examples of destinations:

– 444: The activated greeting for the mailbox of user 444 is played back.

– 555G2: Greeting 2 for the mailbox of user 555 is played back.

– NG3: Greeting 3 for the mailbox of the user selected by the caller is played

back.

– K60N: The system waits for the user PIN (*PIN#) to be entered and then dials

60. The caller completes with further digits.

Special cases:

– If no user number is entered, the activated greeting for the active mailbox is

played back once again.

– If the user does not have a mailbox or if an invalid call number is entered, no

action is carried out.

•

Deflect to mailbox (without greeting)

The call is transferred to the user mailbox number entered in the field

Destina-

tion

. The activated mailbox greeting is not played back. Similar to the previously

described examples, macros "N" and "K" can also be used.

Special cases:

– If no user number is entered, the voice message on the active mailbox is re-

corded.

– If recording is not enabled with the mailbox’s active greeting, no message can

be left.

– The monitoring action configured under

End of greeting

in the case of an

assigned auto attendant is carried out.

– If the user does not have a mailbox or if an invalid call number is entered, no

action is carried out.

•

Leave voice message

The call is transferred to the user mailbox number entered in the field

Destina-

tion

. The mailbox’s active greeting is not played back; instead the caller has the

possibility of directly leaving a voice message after a prompt tone. Similar to the
previously described examples, macros "N" and "K" can also be used.

Special cases:

– If no user number is entered, the voice message on the active mailbox is re-

corded.

«
...
422
423
424
425
426
...
»

Содержание 400 Series

















































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов