AAQ AutoLift AL-10000T, Руководство по установке и инструкции по эксплуатации

Страница: 24 / 39

6. Maintenance
6.1 Maintenance Schedule
Establish a periodic preventive maintenance procedure to ensure trouble-free operation and long service life.
DAILY:
- Raise and lower the
hoist
(with no vehicle) at the beginning of each shift to verify the runways are level
and that the
hoist
is operating properly.
- Check all hydraulic fittings and lines for damage and leaks. Check electrical wiring for damage. Check all moving parts
for uneven or excessive wear. Repair or replace all damaged, worn, or broken components immediately.
- Clean all debris from the base frame area
- Remove oil/grease on runways and working area.
WEEKLY:
- Check hydraulic fluid in console reservoir and top up if required.
- Check safety lock adjustment.
MONTHLY:
- Check that all anchor bolts are torqued to 75 ft-lbs (102Nm).
- Clean and lubricate moving parts (see diagram #4 for grease fitting locations)
EVERY YEAR:
- Have a certified
hoist
technician inspect and certify all aspects of the
hoist
.
EVERY TWO YEARS:
- Change and replace hydraulic oil in cylinders and console reservoir.
Lubrication Specifications:
- where grease is required use a multi-purpose lithium grease
- where lubricating oil is required use a SAE 30 oil
- where hydraulic oil is required use ISO 32 hydraulic oil (10W non detergent )
6.2 Maintenance By the Operator
Hydrauli
c
System
1 Once a year check the fluid level (see below)
with the
hoist
fully lowered and add fluid as required.
2 Visually check all hydraulic hoses for tightness.
Turn off and lock the main switch before servicing the hoist.
The maintenance intervals indicated below apply to average workshop use.
The hoist should be inspected more frequently for high use application.
23