a2b Obree, Руководство пользователя

Страница: 76 / 80

76
Owner’
s manual
No. Step inspection
7
8
9
10
11
Date
Signature / stamp of the A2B specialist workshop
Steering head
•
Check bearing play of steering head and adjust or replace, if
necessary
Component assembly: Derailleur system
•
Clean and lubricate derailleur mechanism and derailleur.
•
Check derailleur system cord and outer shells for state and function,
replace, if necessary
•
Check derailleur mechanism adjustment, adjust, if necessary
•
Check all screws on the derailleur mechanism/derailleur for firm fit
Component assembly: Brake system
•
Clean brake bosses.
•
Check brake pads, replace, if necessary
•
Check brake pressure, refill brake oil, if necessary
•
Check brake system for tightness.
•
Check brake system screws for firm fit
•
Check brake function and efficiency
Guard plates-luggage rack-side stand-lighting system
•
Tighten all screws
•
Check lighting system for functioning & setting, adjust, if necessary
Component assembly: electrical drive system & lock
•
Check lines for proper fastening, breakings, chafing, bends, replace,
if necessary
•
Check plug contacts for corrosion and scaling, clean or replace,
if necessary
•
Check cable joints for correct connection
•
Check display for functioning & error codes
•
Run current software update
•
Check battery state and charge
•
Check alignment & state of the battery slide rails, adjust/replace,
if necessary
•
Check locking cylinder on battery slot for functioning, clean and
lubricate
•
Check brake switch/motor stop switch for functioning
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X