a2b Obree, Руководство пользователя

Страница: 25 / 80

25
5.3.2.3 Dynamo function and switch-on
routine "light“ (optional)
The neodrives motor features a dynamo
function and supplies the headlamp on your
Pedelec with power even if the battery is
flat, not attached or defective. Thanks to
this function, a standard bicycle dynamo
on the front wheel may not be required.
In the normal Pedelec mode, the bicycle
headlamp is supplied with 36 volts from
the battery pack. When switching on the
bicycle lighting, a certain sequence must be
followed for electronic query routines:
1. Switch on the Pedelec, before switching
on the lighting. Switch on the lighting
only when the Pedelec shows readiness
for travelling in the display for about 3
seconds.
2. After the end of the tour, the lighting has
to be switched off as a basic rule so that
the correct switch-on routine can be run
when it is switched on again.
If the Pedelec, contrary to the above
routine, is switched on when the lighting is
switched on, a warning symbol is shown on
the display. Switch off the Pedelec and the
light in this case and proceed as described
above.
5.3.2.4 Selection of the assistance level
An assistance level that you have requested
(5 levels possible) may be permanently
stored in the sMMI by your specialist dealer
as part of a travel profile. This level will be
available instantly after switch-on of the
sMMI and will be shown on the sMMI's
display as bar element [9]. You may also
change the assistance level manually at
any time using the buttons [1] UP and [3]
DOWN of the controller, thereby increasing
or reducing the number of the individual
white bar elements in the field [8] according
to the assistance level selected by you.
When switching off the Pedelec, any
changes made using the controller buttons
are not included.
Therefore, when restarting the Pedelec, the
assistance level stored in the travel profile
will be available only.
According to the selected assistance level,
field [6] indicates the distance that can be
travelled using motorised assistance. The
higher the selected assistance level, the
more energy is consumed by the motor. The
range to be achieved reduces accordingly.