a2b Obree, Руководство пользователя

Страница: 42 / 80

42
Owner’s manual
5.6.2 sMMI
•
The contacts of the sMMI dock are spring loaded and should be
cleaned from time to time using a contact spray to ensure they
operate flawlessly and for a long time.
•
The sMMI casing must only be cleaned using a damp (not wet) cloth.
5.7. Transport
The following information has to be observed when transporting the
Pedelec by car:
•
Protect all components of your Pedelec from moisture and dirt by
taking appropriate measures.
•
Remove the battery and sMMI from the bicycle before attaching
the Pedelec to the bicycle rack of your car. In this way, the weight
which you have to lift in case of a roof bicycle rack is reduced.
•
Always transport the battery and the sMMI inside your car.
•
When transporting it inside your car (e.g. in an estate car), the
sMMI and battery should also be removed to avoid damage
during loading and the tour.
•
In case of carrier systems featuring down tube clamping, make
sure that the battery mounting rail is not crushed/damaged when
tightening the clamping device.
•
Ensure that the cable ends cannot cause damage to the Pedelec
or your car during transport.
•
Check all the Pedelec's contacts for possible foreign matters or
moisture after the transport. To ensure safe operation, especially
all plug connections must be free from dirt and foreign matters
and completely dry.
•
Never put your Pedelec on the gear box side during transport, for
instance in a car boot. It could be damaged in this way.
5.8. Warnings
•
When not in use, do not permanently expose your Pedelec to
strong solar radiation. This would cause the motor to heat up
and in extreme cases not be able to operate at full power. Plastic
parts also age faster under intense solar radiation.
•
If high temperatures (caused for example by uninterrupted
operation or during stop by reason of permanent direct solar
radiation) lead to a system standstill, let the motor cool down for
about 10 minutes before continuing your ride.
•
The maximum speed (non-motorised operation) of the system
is 75 km/h. When exceeding this speed, you endanger the
electronic components which could be damaged in the worst
case. The maximum speed is logged by the system.
5.9. Error indications and possible remedies
The system cannot be switched on
(no indication on the sMMI display)
•
Has the battery been correctly inserted in its holder?
•
Have all plugs been correctly connected?
•
Are there any deposits (such as metal filings) on the magnetic
plug on the battery? Please check this very carefully!
•
Is the battery "awake"? After 48 hours of non-use, the battery
falls into a "deep sleep" and must be reactivated by pressing the
battery button once.