a2b Obree, Руководство пользователя

Страница: 34 / 80

34
Owner’s manual
5.3.2.14 USB port
The sMMI has a USB port [14] which is
primarily used by your specialist dealer
for maintenance and diagnosis. Make
sure the rubber cover fixed above is
always fully inserted and seals the port.
If the sMMI is not fully sealed, moisture
can get inside or steam up the display from inside.
5.3.2.15 Programming options by the specialist dealer
Your neodrives drive system has been optimally aligned to your
A2B by the factory so that usually there is no need for changes. If
individual changes have to be made based on your requests, the
following parameters can be programmed:
Speed of the pushing aid forward dir.:
Set to 6 km/h in factory setting (permissible maximum value
according to law). This value may only be reduced.
Standard assistance level:
The assistance level always available after switch-on of the
Pedelec. Adjustable from 0 - 5, value 3 is preprogrammed in factory
setting.
sMMI standard settings:
Language settings, time format (12/24 h)
sMMI lock:
The sMMI can optionally be permanently connected to the motor.
As a result, the sMMI is only operable with this motor/system and
cannot be used with another motor.
Service interval:
Depending on the specified appropriate maintenance interval,
this interval can be set or reset by date or kilometres travelled
(depending on which is first).
Wheel circumference:
To correctly display the speed and comply with statutory provisions
as to speed restriction, the bicycle dealer may change the
wheel circumference. This is only necessary if the drive wheel is
subsequently fitted with a tyre increasing or reducing the original
wheel circumference or if the motor has been readjusted to a larger
or smaller rim.
This parameter may only be changed if the statutory requirements
are complied with (max. 25 km/h for Pedelecs); in case of misuse
the warranty and product liability will become void. Moreover, illegal
tampering may lead to criminal consequences if detected during
police checks
All changes to the travel parameters are logged in the data
storage of the sMMI.