a2b Obree, Руководство пользователя

Страница: 30 / 80

30
Owner’s manual
5.3.2.8 Date and time
Date and time can be set individually, too. The set time is shown
in field [12] of the start menu, while the date is used for internal
calculations in the sMMI only. As for the functions already
described in the previous sections, you can access the various
submenus from the start menu as indicated above to set the date
and time (see overview provided in section 3). You can modify the
required parameters here.
5.3.2.9 Assist mode
Three travel modes - BOOST, TOUR and ECO - are stored in the
sMMI.
In Eco mode, the torque and thus, the maximum available motor
power is automatically reduced by about 40%, thereby reducing
power consumption. At the same time, the agility is also modified so
that the drive responds better. The ECO travel mode is especially
suitable for journeys in which the battery charge is to ensure as
long a distance as possible.
In the Tour mode, 75% of the maximum motor torque are available.
Performance and range both are at a high level. Moreover, the heat
generation in the motor (see section 4, Thermal Management) is
moderate in this mode so that long, steep inclines can be managed
very well in the Tour mode.
In the Boost mode you obtain the full drive performance. It is suited
for quick rides in the city, incl. powerful starting at traffic lights. The
full "Boost performance" may not be permanently available. Under
rough conditions, such as steep uphill rides, the drive performance
may be reduced due to heat generation (see section 4, Thermal
management). In the Boost mode, the range will also be smaller
than in the other modes.
To activate the required mode, press the controller button [2]
while being in the start menu (see section 3.2.2) to access the
next submenu. Select "Menu" there and, in the selection window
appearing afterwards, the item "Travel mode". Then, another
window will be opened in which you may activate the required
mode. After having completed the activation, you return to the start
menu by pressing the button [2] for several times. The travel modes
ECO and SPORT can only be selected when the bike has stopped,
not during travelling.
The parameters stored in the BOOST, TOUR and ECO modes
can be adapted to your requests. Please contact your specialist
dealer concerning this matter.