a2b Obree, Руководство пользователя

Страница: 23 / 80

23
5.3.2 Functions of the sMMI
5.3.2.1 Switching on and off
Switching on
To switch on the sMMI, press the menu button [2] on the controller.
After a couple of seconds, a welcome screen followed by the start
menu shown opposite will appear. If functions are already activated
or the battery is not fully charged, the display of your sMMI may
differ from the figure in part.
Switching off
To switch off your Pedelec, you have to press the button [2] of the
controller for about 2 seconds, while the start menu is displayed.
By doing so, you access the submenu shown opposite in which
display you may jump up or down using the buttons [1] and [3] of
the controller. Any selected field is displayed within a U-shaped
edge. Select the field "Switch off" and press the button [2] briefly.
Your Pedelec will now be switched off.
Automatic switch-off
If your Pedelec is not used for 10 minutes, the system will
automatically be switched off. Pressing the menu button again will
switch on the system once again.
Do not switch off your Pedelec by removing the sMMI, this
could damage the electronics.