a2b Obree, Руководство пользователя

Страница: 22 / 80

22
Owner’s manual
5.3.1 Fitting and removing the sMMI
Fitting
Place the sMMI [4] in the correct position (the "neodrives" logo
faces the rider) and twisted to the left at an angle of about 30
degrees on the dock [5] (see chart).
Turn the sMMI [4] on the dock [5] by 30 degrees clockwise using
slight pressure so that both components are aligned to each other.
While doing so, the electrical connections to the controller, motor
and battery pack are automatically established.
Removing
Turn the sMMI [4] on its dock [5] by about 30 degrees
anticlockwise. While doing so, the electrical connections are
disengaged and the sMMI [4] can be removed. Before removing,
the sMMI must be switched off (see section 3.2).
To protect your Pedelec from unwanted use by third persons
or against theft, the sMMI should always be removed from the
handlebar when not in use. Removing the sMMI, however, does
not replace securing your Pedelec against theft by means of
appropriate measures (use of a bicycle lock, an anti-theft chain or
similar devices).