3Ware 7000-2 - Escalade RAID Controller, Руководство пользователя

Страница: 59 / 196

3ware Disk Array Configuration Utility
www.3ware.com 59
Figure 18. Degraded RAID 10 Array Drive When Not in Use
Note: A RAID 10 array can be configured with either
four, six, eight, ten or twelve drives. In a 4-drive config-
uration, up to two drives can be rebuilt. In a 6-drive con-
figuration, up to three drives can be rebuilt. In an 8-drive
configuration, up to four drives can be rebuilt. In a 12-
drive configuration, up to six drives can be rebuilt.
Rebuilding a RAID 5 disk array
Escalade ATA RAID Controllers allow you to create fault tolerant
RAID 5 disk arrays. These disk arrays achieve fault tolerance by
using a simple (exclusive OR) function to generate the parity data
3 w a r e D i s k A r r a y C o n f i g u r a t i o n
Create Array
Restore Initial Values
Previous/Next
Toggle Hot Spare
Cancel
Select/Deselect
Done
Alt-F1
F6
Enter
F8
$
Esc
Delete Array Maintain Array
Rebuild Array
Available Drives:
Disk Arrays:
Array Unit 0 - 4 drive 64K RAID 10 60.0GB DEGRADED
Port 0 - QUANTUM FIREBALLP LM30 30.0GB Not in Use
Port 1 - QUANTUM FIREBALLP LM30 30.0GB
Port 2 - QUANTUM FIREBALLP LM30 30.0GB
Port 3 - QUANTUM FIREBALLP LM30 30.0GB
Help