3Ware 7000-2 - Escalade RAID Controller, Руководство пользователя

Страница: 70 / 196

3ware Escalade ATA RAID Controller User Guide
70 www.3ware.com
Installing the ATA RAID controller and
Windows NT 4.0
Materials required:
• Microsoft Windows NT 4.0 installation CD-ROM and diskettes
• 3ware CD-ROM
(You will be required to create a 3ware Windows Driver Installa-
tion Diskette from the files located on the 3ware CD-ROM.
Please refer to the "Readme.txt" file on the 3ware CD-ROM for
directions.)
Create disk arrays
Refer to the 3ware Hardware Installation and 3ware Disk Array
Configuration Utility chapters .
Has your boot drive been partitioned?
Microsoft Windows NT 4.0 Setup occasionally has problems
installing on drives that have not been partitioned. If you are having
trouble you may need to create a partition on the drive where you
plan to install Windows NT 4.0.
1 Use the
FDISK DOS utility to get your disk partitioned and
ready for installation quickly:
2 Boot MS-DOS and use FDISK to create a partition on the boot
drive. The partition does not need to be formatted or made
active. With
FDISK you are limited to 4 GB for your boot parti-
tion. If you need a larger boot space create a single small (e.g.,
100 MB) partition, then adjust the size during Windows NT 4.0
Setup
.
Boot the system
Insert the Windows NT 4.0 CD-ROM into the CD-ROM drive, or
the Windows NT 4.0 diskettes into the floppy diskette drive.