3Ware 7000-2 - Escalade RAID Controller, Руководство пользователя

Страница: 56 / 196

3ware Escalade ATA RAID Controller User Guide
56 www.3ware.com
Figure 15. Delete Disk Array Display
Navigate to the Delete Array button and hit Enter to bring up the
Delete Disk Array display. Check that the correct drives are listed.
Select the OK key to confirm deleting the array or Cancel to reject
it. Recall that the array is not actually deleted and no data will be
overwritten until you have finished making all your changes and
selected the
F8 key.
How to maintain or verify a disk array
The Maintain Disk Array (see Figure 16) shows the current disk
array configuration that you have selected. The array’s Write
Cache State can be changed. Refer to Select write cache proper-
ties paragraph in the Creating a disk array section . Verify Array
can be specified as no or yes . The default is no . Yes launches a fore-
ground process that checks the data integrity of a fault tolerant
Restore Initial Values
Previous/Next
Toggle Hot Spare
Cancel
Select/Deselect
Done
Alt-F1
F6
Enter
F8
$
Esc
Help
3 w a r e D i s k A r r a y C o n f i g u r a t i o n
Create Array Delete Array Maintain Array Rebuild Array
Available Drives:
Disk Arrays:
*Array Unit 0 - 4 drive 64K RAID 0 120.0GB
Port 0 - QUANTUM FIREBALLP LM30 30.0GB
Port 1 - QUANTUM FIREBALLP LM30 30.0GB
Port 2 - QUANTUM FIREBALLP LM30 30.0GB
Port 3 - QUANTUM FIREBALLP LM30 30.0GB