3Ware 7000-2 - Escalade RAID Controller, Руководство пользователя

Страница: 142 / 196

3ware Escalade ATA RAID Controller User Guide
142 www.3ware.com
Compiling the Driver (For experts only)
If you wish to compile the driver yourself (for a different kernel
version that you are running), then perform the following steps.
1 Copy the driver source from the floppy into a working directory.
2 Untar the driver source with the command,
tar zxfp 3w-
xxxx.tgz
.
3 You must have a full Linux kernel source tree in
/usr/src/linux
in order to do the compile.
4 To build UP module boot to desired UP kernel, type:
make -f makefile.oth
The created file is 3w-xxxx.o
5 To build SMP module boot to desired SMP kernel, type:
make smp -f makefile.oth
The created file is 3w-xxxx.smp
6 Copy the module to the scsi directory.
For 2.4 kernels, copy module to:
/lib/modules/***kernel string***/kernel/drivers/
scsi/3w-xxxx.o
Install and run 3DM disk management utility
Refer to the 3DM Disk Management Utility chapter. If you are
using the 3ware Command Line Interface, refer to the 3ware CLI
User Guide.