3Ware 7000-2 - Escalade RAID Controller, Руководство пользователя

Страница: 89 / 196

Windows® 98/ME Installation
www.3ware.com 89
Installing the ATA RAID controller on
systems that boot from a different device
Materials required:
• 3ware CD-ROM
(You will be required to create a 3ware Windows Driver Installa-
tion Diskette from the files located on the 3ware CD-ROM.
Please refer to the "Readme.txt" file on the 3ware CD-ROM for
directions.)
Create disk arrays
Refer to the 3ware Hardware Installation and 3ware Disk Array
Configuration Utility chapters.
Install the 3ware driver
As a Plug and Play device Windows 98/ME will recognize the
Escalade ATA RAID Controller and automatically bring up the
Add New Hardware Wizard , which will guide you in installing
the new 3ware driver (see Figure 28). When the Add New Hard-
ware Wizard screen appears continue to the Install/Upgrade 3ware
driver section. Perform the following steps only if this Wizard does
not appear on your screen or was cancelled for some reason:
1 Log in after Windows installation is complete and insert the
3ware Windows driver installation diskette.
2 From the Start menu, select Setting, then Control Panel .
3 Double click on Add New Hardware icon. When the Add New
Hardware wizard lists devices that need to be installed, select
the SCSI Controllers .
4 Continue to the Install/Upgrade 3ware driver section.