Programmer
Manual
ESC ! n
[Name] Select print mode(s)
[Format] ASCII ESC ! n
Hex 1B 21 n
Decimal 27 33 n
[Range] 0
≤
n
≤
255
[Description] Selects print mode(s) using n as follows:
[Details] • When both double-height and double-width modes are selected, quadruple size characters are printed.
• The printer can underline all characters, but can not underline the space set by
HT
or 90° clockwise rotated characters.
• The thickness of the underline is that selected by
ESC
, regardless of the character size.
• When some characters in a line are double or more height, all the characters on the line are aligned at the baseline.
•
ESC E
can also turn on or off emphasized mode. However, the setting of the last received command is effective.
•
ESC
—can also turn on or off underline mode. However, the setting of the last received command is effective.
•
GS
! can also select character size. However, the setting of the last received command is effective.
• Emphasized mode is effective for alphanumeric and Kanji. All print modes except emphasized mode is effective only for
alphanumeric.
[Default] n = 0
[Reference]
ESC -, ESC E, GS !
Bit
0
1
2
3
4
5
6
7
Off/On
Off
On
-
-
Off
On
Off
On
Off
On
-
Off
On
Hex
00
01
-
-
00
08
00
10
00
20
-
00
80
Decimal
0
1
-
-
0
8
0
16
0
32
-
0
128
Function
Character font A (12
×
24).
Character font B (9
×
17).
Undefined.
Undefined.
Emphasized mode not selected.
Emphasized mode selected.
Double-height mode not selected.
Double-height mode selected.
Double-width mode not selected.
Double-width mode selected.
Undefined.
Underline mode not selected.
Underline mode selected.
ESC $ nL nH
[Name] Set absolute print position
[Format] ASCII ESC $ nL nH
Hex 1B 24 nL nH
Decimal 27 36 nL nH
[Range] 0
≤
nL
≤
255
0
≤
nH
≤
255
[Description]
·
Sets the distance from the beginning of the line to the position at which subsequent characters are to be printed.
·
The di
stance from the beginning of the line to the print position is [( nL + nH ×256) ×(vertical or horizontal motion
unit)] inches.
[Details]
·
Settings outside the specified printable area are ignored.
·
The horizontal and vertical motion unit are specified by
GS P
.
·
The GS P command can change the horizontal (and vertical) motion unit. However, the value cannot be less than the
minimum horizontal movement amount, and it must be in even units of the minimum horizontal movement amount.
·
In standard mode, the horizontal motion unit ( x) is used.
·
In page mode, horizontal or vertical motion unit differs depending on the starting position of the printable area as
follows:
1 When the starting position is set to the upper left or lower right of the printable area using
ESC T
, the horizontal motion
unit ( x) is used.
2 When the starting position is set to the upper right or lower left of the printable area using
ESC T
, the vertical motion
unit ( y) is used.
[Reference]
ESC \, GS $, GS \, GS P
Содержание RPT008
Страница 1: ......