3nStar RPT008, Руководство программиста

Страница: 34 / 44

FNC2
FNC3
FNC4
"{"
{2
{3
{4
{{
7B, 32
7B, 33
7B, 34
7B, 7B
123, 50
123, 51
123, 52
123, 123
·
The printer prints an HRI character ( ) as start character at the beginning of the HRI character string.
·
The printer prints an HRI character ( ) as a stop character at the end of the HRI character string.
·
The printer prints HRI characters (F + an alphabetic character) as a control character (<00>H to <1F>H and <7F>H):
[Examples] example print "No. 123456"
In this example, the printer first prints "No." With CODE B, followed by the rest of the digital print CODE C:
·
If the character is not in the forefront of barcode data set selection, the printer will stop processing this command, and
the rest of the data as normal data.
• If "{" and followed by its combination of character is not specified above that, the printer stops processing this comm-
and, and the rest of the data as normal data.
• If the printer is not receiving character code character set data, the printer stops processing this command, and the rest
of the data as normal data.
• When the printer to print HRI characters do not print shift characters and character set selection data.
HRI characters • function character is not printed.
• Control characters (<00> H to <1F> H and <7F> H) of HRI characters are not printed;
<Other> must ensure clearance around barcode. Gap varies by type of bar code.
[Reference] GS H, GS f, GS h, GS w
GS r n (*)
[Name] Transmit status
[Format] ASCII GS r n
Hex 1D 72 n
Decimal 29 114 n
[Range] n = 1, 2, 49, 50
[Description] Transmits the status specified by n as follows:
[Details] • This command just effect the serial interface.
• This command is executed after the data in the receive buffer is processed. Therefore,there may be a time lag between
receiving this command and transmitting the status,depending on the receive buffer status.
• The status types to be transmitted are shown below:
Paper sensor status (n = 1, 49):
Cash drawer status(n = 2, 50):
n
0,48
1,49
Function
Transmits paper sensor status
Transmits drawer kick-out connector status
Bit
2-3
0-1
4
5,6
7
Off/On
Off
Off
Off
Off
On
On
Hex
00
00
03
0C
00
—
00
Decimal
0
0
3
0
Status for ABS
Paper roll near-end sensor: paper adequate.
Paper roll near-end sensor: paper almost used up.
Paper roll end sensor: paper adequate.
Paper roll end sensor: no paper.
Not used. Fixed to Off.
Undefined.
Not used. Fixed to Off.
12
—
0
NO.
1 2 3 4 5 6
GSK731012366781114612367123456
Programmer Manual