④
Set left margin:
GS L
⑤
Set printable area width:
GS W
• The following command is ignored in page mode:
①
Execute test print:
GS ( A
• The following command is not available in page mode:
①
Print NV bit image:
FS p
②
Define NV bit image:
FS q
③
Write to user NV memory:
FS g 1
④
Print raster bit image:
GS v 0
• The printer returns to standard mode when power is turned on, the printer is reset, or
ESC @
is used.
[Reference]
FF, CAN, ESC FF, ESC S, ESC T, ESC W, GS $, GS \
Programmer
Manual
ESC G n
[Name] Turn on/off double-strike mode
[Format] ASCII ESC G n
Hex 1B 47 n
Decimal 27 71 n
[Range] 0
≤
n
≤
255
[Description] • Turns double-strike mode on or off.
• When the LSB of n is 0, double-strike mode is turned off.
• When the LSB of n is 1, double-strike mode is turned on.
[Details] • Only the lowest bit of n is enabled.
• Printer output is the same in double-strike mode and in emphasized mode.
[Default] n = 0
[Reference]
ESC E
ESC M n (*)
[Name] Select character font
[Format] ASCII ESC M n
Hex 1B 4D n
Decimal 27 77 n
[Range] n = 0, 1, 48, 49
[Description] Selects character fonts.
n
0,48
1,49
Function
Tcharacter font A (12×24) selected.
Character font B (9×17) selected.
ESC R n
[Name] Select an international character set
[Format] ASCII ESC R n
Hex 1B 52 n
Decimal 27 82 n
[Range] 0
≤
n
≤
15
[Description] Selects an international character set n from the following table:
n
0
1
2
3
4
5
6
Character
U.S.A
France
Germany
U.K
Denmark
Sweden
Italy
Содержание RPT008
Страница 1: ......