d1 d4 d7
d2 d5 d8
d3 d6 d9
MSB
LSB
Bit-image data
Print data
d1 d2 d3
Single density Double density
Print data
1 dot
Bit-image data
d4 d5 d6
d7 d8
d9
•
When 24-dot bit image is selected:
ESC – n
[Name] Turn underline mode on/off
[Format] ASCII ESC - n
Hex 1B 2D n
Decimal 27 45 n
[Range] 0
≤
n
≤
2, 48
≤
n
≤
50
[Description] Turns underline mode on or off, based on the following values of n:
[Details] • The printer can underline all characters (including right-side character spacing), but cannot underline the space set by
HT.
• T h e p r i nter cannot underline 90 clockwise rotated characters and white/black inverted characters.
• W
h
e
n
underline mode id turned off by setting the value of n to 0 or 48, the following data is not underlined, and the
underline thickness set before the mode is turned off does not change. The default underline thickness is 1 dot.
• Changing the character size does not affect the current underline thickness.
• Underline mode can also be turned on or off by using
ESC !
. Note, however, that the last received command is effective.
•This command does not affect the setting of Kanji characters.
[Default] n = 0
[Reference]
ESC !
n
0,48
1,49
2,50
Function
Turns off underline mode
Turns on underline mode (1-dot thick)
Turns on underline mode (2-dots thick)
Programmer
Manual
ESC 2
[Name] Select default line spacing
[Format] ASCII ESC 2
Hex 1B 32
Decimal 27 50
[Description] Selects 1/ 6-inch line (approximately 4.23mm) spacing.
[Details] The line spacing can be set independently in standard mode and in page mode.
[Reference]
ESC 3
Содержание RPT008
Страница 1: ......