FS &
[Name] Select Kanji character mode
[Format] ASCII FS &
Hex 1C 26
Decimal 28 38
[Description] Selects Kanji character mode.
[Reference]
FS .,
FS – n
[Name] Turn underline mode on/off for Kanji characters
[Format] ASCII FS - n
Hex 1C 2D n
Decimal 28 45 n
[Range] 0
≤
n
≤
2, 48
≤
n
≤
50
[Description] Turns underline mode for Kanji characters on or off, based on the following values of n.
[Details] • The printer can underline all characters (including right- and left-side character spacing), but cannot underline the
space set by
HT
and 90° clockwise-rotated characters.
• After the underline mode for Kanji characters is turned off by setting n to 0, underline printing is no longer performed,
but the previously specified underline thickness is not changed. The default underline thickness is 1 dot.
• The specified line thickness does not change even when the character size changes.
• It is possible to turn underline mode on or off using
FS
!, and the last received command is effective.
[Default] n = 0
[Reference]
FS !
n
0,48
1,49
Function
Turns off underline mode for Kanji characters
Turns on underline mode for Kanji characters (1-dot thick)
Turns on underline mode for Kanji characters (2-dot thick)
2,50
FS .
[Name] Cancel Kanji character mode
[Format] ASCII FS .
Hex 1C 2E
Decimal 28 46
[Description] Cancels Kanji character mode.
[Reference]
FS &,
FS 2 c1 c2 d1...dk Define user-defined characters
[Format] ASCII FS 2 c1 c2 d1 ... dk
Hex 1C 32 c1 c2 d1 ... dk
Decimal 28 50 c1 c2 d1 ... dk
[Range] c1, c2 define the character of the representative character encoding
C1=FEH
A1H
≤
c2
≤
FEH
0
≤
d
≤
255
k = 72
[Description]Defined by the designated c1, c2 characters
[Default] • c1, c2 on behalf of a user-defined character encoding, c1 specifies the first byte, c2 specify the second byte.
[Notes] • d represents the data. 1 to print a dot, 0 means no printing point.
No custom characters.
Between custom Kanji fonts and data relationship shown below:
Programmer
Manual
Содержание RPT008
Страница 1: ......