7
8
9
10
11
12
13
14
15
Spain
Japan
Norway
Denmark
Spain
Latin
Korea
Sloveina/Croatia
Chinese
The character sets for Slovenia/Croatia and China are supported only in the Simplified Chinese model.
[Default] Simplified Chinese model: n = 15
Models other than the Simplified Chinese model: n = 0
ESC S (*)
[Name] Select standard mode
[Format] ASCII ESC S
Hex 1B 53
Decimal 27 83
[Description] Switches from page mode to standard mode.
[Details] • This command is effective only in page mode.
• Data buffered in page mode are cleared.
• This command sets the print position to the beginning of the line.
• The printing area set by
ESC W
are initialized.
• This command switches the settings for the following commands (in which the values can be set independently in
standard mode and page mode) to those for standard mode:
①
Set right-side character spacing:
ESC SP, FS S
②
Select default line spacing:
ESC 2, ESC 3
• The following commands are enabled only to set in standard mode.
①
Set printing area in page mode:
ESC W
②
Select print direction in page mode:
ESC T
• The following commands are ignored in standard mode.
①
Set absolute vertical print position in page mode:
GS $
②
Set relative vertical print position in page mode:
GS \
• Standard mode is selected automatically when power is turned on, the printer is reset, or command
ESC @
is used.
[Reference]
FF, ESC FF, ESC L
ESC T n (*)
[Name] Select print direction in page mode
[Format] ASCII ESC T n
Hex 1B 54 n
Decimal 27 84 n
[Range] 0
≤
n
≤
3
48
≤
n
≤
51
[Description] Selects the print direction and starting position in page mode. n specifies the print direction and starting position as
follows:
n
0, 48
1, 49
2, 50
3, 51
Print Direction
Left to right
Bottom to top
Right to left
Top to bottom
Starting Position
Upper left
Lower left
Lower right
Upper right
Print area
B
C
A
D
Forward
Programmer
Manual
Содержание RPT008
Страница 1: ......