3nStar RPT008 Скачать руководство пользователя

Страница: 36 / 44

GS w n

[Name] Set bar code width

[Format] ASCII GS w n

Hex 1D 77 n

Decimal 29 119 n

[Range] 2

≤

[Description] Set the horizontal size of the bar code.

n specifies the bar code width as follows:

Multi-level bar codes are as follows:

UPC-A, UPC-E, JAN13 (EAN13), JAN8 (EAN8), CODE93, CODE128

Binary-level bar codes are as follows:

CODE39, ITF, CODABAR

[Default] n = 3

[Reference]

GS k

Module Width (mm) for

Multi-level Bar Code

0.25

0.375

0.5

0.625

0.75

Thick element width (mm)

0.625

1.0

1.25

1.625

1.875

Binary-level bar codes

Thin element width (mm)

0.25

0.375

0.5

0.625

0.75

4
5

FS ! n

[Name] Set print mode(s) for Kanji characters

[Format] ASCII FS ! n

Hex 1C 21 n

Decimal 28 33 n

[Range] 0

≤

255

[Description] Sets the print mode for Kanji characters, using n as follows:

[Details] • When both double-width and double-height modes are set (including right- and left-side character spacing), quadruple-

size characters are printed.

• The printer can underline all characters (including right- and left-side character spacing), but cannot underline the

space set by

and 90° clockwise-rotated characters.

• The thickness of the underline is that specified by

, regardless of the character size.

• When some of the characters in a line are double or more height, all the characters on the line are aligned at the

baseline.

• It is possible to emphasize the Kanji character using

FS W

!, the setting of the last received command is

effective.

• It is possible to turn under line mode on or off using

, and the setting of the last received command is effective.

[Default] n = 0

[Reference]

FS -, FS W, GS !

Bit

0-1

4-6

Off/On

Off

—

Off

Hex

—

Decimal

—

128

Undefined.

Function

Double-width mode is OFF.

Double-width mode is ON.

Double-height mode is OFF.

Double-height mode is ON.

Undefined.

Underline mode is OFF.

Underline mode is ON.

Programmer

Manual

Содержание RPT008













































Результаты поиска

Содержание RPT008

Отзывы:

Похожие инструкции для RPT008

Бренды по названию

Популярные бренды

3nStar RPT008, Руководство программиста

Результаты поиска

Содержание RPT008

Отзывы:

Похожие инструкции для RPT008

Бренды по названию

Популярные бренды