3M 2250ME-iD Скачать руководство пользователя страница 43

Страница: 43 / 64

78-8130-6151-8 Rev G

3. Name the template.
4. Press

Modify

[SK] to manually enter the name of

the template.

5. Select

UserEdit

6. Press

Loc

ate/OK [5].

7. Move the boxed cursor by pressing the left/right

arrows [SK], or up/down arrow [SK] to move

the cursor up or down.

8. Press

Select

[SK] to enter the alphanumeric

character.

−

Entry will appear at the top of the display.

9. Press

Loc

ate/OK [5] when entry is complete.

10. Press

Exit

[SK]

to cancel.

Note: To clear the previous field entry, select

the ‘back arrow’ with the cursor and delete the

previous entry.

11. Navigate through the fields by pressing the left/

right arrows [SK].

12. Press

Modify

[SK] to populate the highlighted

field.

13. When modifying the Labels (left hand side of

template information) there are three options for

editing that are presented:
a. UserEdit.
b. Choosing one of the common (compressed)

terms from the available list of terms.

c. Del Row (delete row).

Содержание 2250ME-iD

































































Результаты поиска

Содержание 2250ME-iD

Отзывы:

Похожие инструкции для 2250ME-iD

Бренды по названию

Популярные бренды

3M 2250ME-iD, Руководство оператора

Результаты поиска

Содержание 2250ME-iD

Отзывы:

Похожие инструкции для 2250ME-iD

Бренды по названию

Популярные бренды