3M 2250ME-iD Скачать руководство пользователя страница 46

Страница: 46 / 64

78-8130-6151-8 Rev G

Step 1.

Select a template from the list on the display

to be written into the marker by pressing the up/

down arrows.

−

[SK] to highlight the preferred template.

`Last Written /Read' is the most recent data

that was written to/read from a marker by the

locator.

Step 2.

Press View/Edit [SK].

−

Four Write Mode options will be displayed

at the bottom of the screen.

−

[SK1] Overwrite: Will overwrite any data

existing on an unlocked marker if `Yes' is

selected and `No' will prevent overwrite.

− [SK2] X-Type: Choose `Yes' if writing to a

Gen 2 marker and `No' if writing to a Gen

1 marker. Gen 2 markers will have an "X"

following the serial number that is printed on

the attached tag.

−

SK3] Marker: Select type of marker to be

written by repeatedly pressing Marker [SK

Toggle].

−

[[SK4] Lock/Unlocked: Press [SK4] to

toggle between locking and unlocking the

marker. The default setting is unlocked

and note that a locked unit cannot be

modified once locked. If the marker will

be locked then a verification screen will

appear to ensure that the marker is locked

intentionally.

Step 3.

Press Menu/OK

−

The selected template will be displayed.

−

The arrow on the right side of the display

indicates there is more information than can

be displayed on the screen (scroll down by

pressing the down arrow [SK]).

Step 4.

Enter user information that will be written to

this marker. (See 15.A Modifying Marker Data to be

Written)

Step 5.

Verify that all information is correct.

Содержание 2250ME-iD

































































Результаты поиска

Содержание 2250ME-iD

Отзывы:

Похожие инструкции для 2250ME-iD

Бренды по названию

Популярные бренды

3M 2250ME-iD, Руководство оператора

Результаты поиска

Содержание 2250ME-iD

Отзывы:

Похожие инструкции для 2250ME-iD

Бренды по названию

Популярные бренды