3M 2250ME-iD Скачать руководство пользователя страница 56

Страница: 56 / 64

78-8130-6151-8 Rev G

−

The indicator flag will light in the Digital Display [T-4] under the Tone icon.

5. Press

Output Level

[T-5] for high or maximum output power level.

−

The indicator flag will light in the Digital Display [T-4] above the Output Level

icon when in high output and flash when in maximum output power level.

−

The Digital Display [T-4] will alternately flash between 577 and 133K.

Receiver Setup

1. Press

On/Off (Power)

[1] to power the receiver on.

2. Press

Locate/OK

[5].

3. Press

Tone/Ext

[SK] to select Tone mode.

4. Connect a second coupler to the Receiver’s

External Jack

[14] ([13] on 2250M

Receiver) using the 3M Earth Contact Frame cable or another coupler cable.

5. Press

Freq

[SK Toggle] to select the highest transmitter frequency (133K).

6. Check the first cable in the group by clamping the coupler around the cable.
7. Press

Gain

[4] down and observe the numerical

Signal Strength

[10].

8. Remember the number and continue by clamping the coupler around the next cable

in the group.

− If the Signal Strength [10] is greater than the previous observation, press Gain

[4] down.

− If the Signal Strength [10] is less than before, ignore it.

− After checking all the cables in the group, the cable with the highest Signal

Strength [10] reading is the target cable.

20. Help Mode

The help screen contains basic information about the unit and its operation. It is designed

to be a quick reference guide.

•

Press the double up/down arrows [SK] to navigate between sections.

−

The single up/down arrows [SK] will scroll the display line by line.

21. 3M

™

Dynatel

™

PC Tool Kit and

Locator Software Upgrades

Locator software upgrades are periodically released and can be downloaded, free of

charge, at www.3M.com/dynatel. Located under the Software Updates section, the

software link is titled 3M™ Dynatel™ M-Series Locator PC Tools. To download the

software, click on the link and then select 3M Dynatel M-Series Underground Locator

PC Tools. Selecting this link will display the latest software downloads as well as any

Release Notes related to the current software release.

Once downloaded to your PC, double click the file and an auto-installer will install the C

Tool desktop software. Double click the Dynatel PC Tool Kit icon on the desktop. Using

Содержание 2250ME-iD

































































Результаты поиска

Содержание 2250ME-iD

Отзывы:

Похожие инструкции для 2250ME-iD

Бренды по названию

Популярные бренды

3M 2250ME-iD, Руководство оператора

Результаты поиска

Содержание 2250ME-iD

Отзывы:

Похожие инструкции для 2250ME-iD

Бренды по названию

Популярные бренды