3M 2250ME-iD Скачать руководство пользователя страница 49

Страница: 49 / 64

78-8130-6151-8 Rev G

3. Press the up/down arrows [SK] to highlight the

information to change.

4. Press

Modify

[SK]. The percentage displayed in

the upper right portion of the display indicates

the remaining memory available on the marker.

5. The operator may select

User Edit

in order to

‘type’ the modification, or

Delete Row

to remove

the entire row from the template, or select

Show

All

to display a list of compressed terms.

Note: Using a common term requires less memory

in the marker.

6. Select an option from the list by pressing the up/

down arrows [SK]. Press Locate/

[5].

7. If

User Edit

is selected, the following display

will appear.

8. Move the boxed cursor to the ‘back arrow’

and press

Select

[SK] to delete the entry to be

modified.

9. Move the boxed cursor by pressing the left/right

arrows [SK], or the Up/ Down Arrow [SK] to

move the cursor to the next row.

10. Press

Select

[SK] to enter the alphanumeric

character.

−

Entry will appear at the top of the display.

11. Press

Locate/OK

[5] when entry is complete.

12. If

Show All

is selected, the following display

will appear.

13. Select a compressed term from the list by

pressing the up/down arrows [SK].

14. Press

Locate/OK

[5]. The modification will

automatically populate the marker template.

16. Reading 3M™ iD Markers

The operator can retrieve the data from the iD marker by pressing Read [SK] on the

Marker Locate display.
The receiver tip should be lowered to the ground to reach maximum read depth.

Содержание 2250ME-iD

































































Результаты поиска

Содержание 2250ME-iD

Отзывы:

Бренды по названию

Популярные бренды

3M 2250ME-iD, Руководство оператора

Результаты поиска

Содержание 2250ME-iD

Отзывы:

Бренды по названию

Популярные бренды