3D Systems, Inc.
5 . Wipe blade off with isopropyl alcohol and inspect for
damage .
NOTE: If blade shows signs of damage replace with
a new one, if blade can be cleaned and no damage is
visible you can replace with existing blade .
6 . Place blade with notch facing towards the inside and resting
behind the metal bar . Start at the left end and insert until you
can feel the blade drop into the notch .
7 . Replace 2x5 cap screw, and tighten with a 1 .5mm Allen
wrench while holding blade in place with other hand, as
shown .
8 . Return planarizer to the
Home
position . Printer is now ready
to use .
25
Содержание ProJet 2500
Страница 1: ...User Guide Original Instructions ProJet 2500 3D Printer System ...
Страница 5: ......
Страница 50: ...45 ...