3D Systems ProJet 2500, Руководство пользователя

Страница: 47 / 53

3D Systems, Inc.
10
LEGAL NOTICES
COPYRIGHT AND CORPORATE IDENTITY
Copyright 3D Systems, Inc . All rights reserved . Subject to change without notice . This document is copyrighted and contains proprietary
information that is the property of 3D Systems, Inc . The licensed user, in the name of whom this document is registered (the “Licensed
User”) does not have the right to copy, reproduce, or translate this document in any way or to any media without the prior written
consent of 3D Systems, Inc . No copies of the document may be sold or given to any person or other entity .
IMPROVEMENTS
3D Systems may (but shall not be obligated to) make improvements to this document from time to time . However, the Licensed User
acknowledges that at any time after the expiration of the date of issuance, 3D Systems may institute a periodic charge or fee payable
by the Licensed User in return for ongoing receipt of improvements . It is the responsibility of the Licensed User to provide 3D Systems
with current information as to its name and address . The Licensed User also undertakes to notify 3D Systems promptly in the event
that it considers any of the data contained in this document to be incomplete or erroneous in any respect, in connection with Licensed
User’s particular or general use .
FCC NOTICE
This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part 15 of the FCC
Rules . These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in
a commercial environment . This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communications . Operation of this equipment in
a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own
expense .
Changes or modifications not expressly approved by 3D Systems could void your authority to operate this equipment.
RADIO FREQUENCY TRANSMISSION
This product generates 13.56 MHz using an Inductive Loop System as a Radio Frequency Identification device (RFID). This RFID
device complies with the requirements specified in FCC Part 15, Industry Canada RSS-210, European Council Directive 99/5/EC, and
all applicable local laws and regulations .
Operation of this device is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation .
The device referenced in this guide contains transmitter, FCC ID: 2ADGF-PJ2500 IC: 12666A-PJ2500
Access to the transmitter for service technicians is available through common enclosure access methods including use of common
tools and removal of covers .
NOTE: Changes or modifications to this equipment not specifically approved by 3D Systems may void the user’s
authority to operate this equipment .
42