3D Systems ProJet 2500, Руководство пользователя

Страница: 26 / 53

3D Systems, Inc.
6
POST PROCESSING PROCEDURES
After a part is printed, there are steps that must be followed before it can be considered finished. Following these steps to successfully process
parts .
STEPS FOR POST PROCESSING A PART
1 .
When a part is finished printing the platform will raise and the
platform clamps will release . Lift the entire platform off of the
printer .
NOTE: Make sure you are wearing nitrile gloves when
handling build platforms and parts to keep hands free
of material .
2 . Place the platform in a freezer for approximately 30 minutes .
This will cool the parts and enable them to separate easily
from the platform .
NOTE: Placing print platform on a metal surface as
shown here speeds up the cooling time .
3 .
After parts are cooled sufficiently, wearing nitrile gloves,
place parts in a metal basket .
NOTE: Nitrile gloves must be worn when handling all
parts that have not been processed .
21