3D Systems ProJet 2500, Руководство пользователя

Страница: 40 / 53

3D Systems, Inc.
MATERIAL CHANGE OVER PROCEDURE (MCO)
When changing from one print material to a new print material you must follow this procedure to ensure successful prints .
NOTE: If you are changing from a pigment to a clear this will be a two-material process . When changing from one
pigment to another you must first go from pigmant 1 to clear to pigment 2. This is the only way to ensure that all of
the first pigment is sufficiently flushed out of the system before you introduce a new pigment. Doing so will ensure
successful prints and keep the two pigments from mixing and causing clogs in the system .
1 . From the Machine UI, select Tools > Material Change Wizard .
The first thing that will appear is a confirmation box asking if you want to start a
material changeover .
2 . Select Yes .
The UI will then ask you to replace the waste bag before starting a material
changeover .
3 . Open the MDM Drawer and check the waste bag . If it is at least half
empty, leave bag in place and select Yes , otherwise change the waste bag
and select Yes .
4 . Close material drawer and continue .
5 . The next thing you will be asked is to remove the part material . Remove
both cartridges of part material and select OK .
35