430
V7122 GatewayUser Guide
IP:
Enter the IP address you want to apply to the VoIP gateway. Use the normal dotted
decimal format.
Subnet:
Enter the subnet mask you want to apply to the VoIP gateway. Use the normal
dotted decimal format. Ensure that the subnet mask is correct. If the address is incorrect,
the VoIP gateway may not function until the entry is corrected and a BootP reset is
applied.
Gateway:
Enter the IP address for the data network gateway used on this subnet that
you want to apply to the VoIP gateway. The data network gateway is a device, such as a
router, that is used in the data network to interface this subnet to the rest of the
enterprise network.
TFTP Server IP:
This field contains the IP address of the TFTP utility that is used for file
transfer of software and initialization files to the gateway. When creating a new client,
this field is populated with the IP address used by the BootP Tool. If a different TFTP
utility is to be used, change the IP address in this field to the IP address used by the
other utility.
Boot File:
This field specifies the file name for the software (
cmp
) file that is loaded by
the TFTP utility to the VoIP gateway after the VoIP gateway receives the BootReply
message. The actual software file is located in the TFTP utility directory that is specified
in the BootP
Preferences
window. The software file can be followed by command line
switches. For information on available command line switches, see
Using Command Line
Switches
.
•
Once the software file loads into the gateway, the gateway begins functioning
from that software. In order to save this software to non-volatile memory, (only
the cmp file, that is, the compressed firmware file, can be burned to your
device's flash memory), the -fb flag must be added to the end of the file name.
If the file is not saved, the gateway reverts to the old version of software after
the next reset.
•
The
Boot file
field can contain up to two file names: cmp file name to be used
for load of application image and ini file name to be used for gateway
provisioning. Either one, two or no file names can appear in the
Boot file
field. To use both file names use the ‘;’ separator (without blank spaces)
between the xxx.cmp and the yyy.ini files (for example, ram.cmp;SIPgw.ini).
ini
File:
This field specifies the configuration
ini
file that the gateway uses to program its
various settings. Enter the name of the file that is loaded by the TFTP utility to the VoIP
gateway after it receives the BootReply message. The actual
ini
file is located in the
TFTP utility directory that is specified in the BootP Preferences window.
Using Command Line Switches
You can add command line switches in the field
Boot File
.
To use a Command Line Switch:
1
In the field
Boot File
, leave the file name defined in the field as it is (for example,
ramxxx.
cmp
).
2
Place your cursor after
cmp
Содержание VCX V7122
