3Com VCX V7122, Руководство пользователя, Страница: 238 / 488

238
V7122 GatewayUser Guide
2
Locate the configuration files you want to load and the ini file in the same directory.
3
Invoke a BootP/TFTP session; the ini and configuration files are loaded onto the device.
Table 47 describes the ini file parameters that are associated with the configuration files.
Table 47
Configuration File Parameters
ini File Field Name Valid Range and Description
CallProgressTonesFilename
The name of the file containing the Call Progress Tones definitions. See
1
Chapter 16: Configuration Files for additional information on how to create
and load this file.
VoicePromptsFileName
The name (and path) of the file containing the Voice Prompts definitions.
See
Prerecorded Tones (PRT) File for additional information on how to
create and load this file.
CASFileName This is the name of the file containing specific CAS protocol definition (such
as ‘E_M_WinkTable.dat’). These files are provided to support various types
of CAS signaling.
CASFileName_x CAS file name (for example, ‘E_M_WinkTable.dat’) that defines the CAS
protocol. It is possible to define up to eight different CAS files by repeating
this parameter. Each CAS file can be associated with one or more of the
gateway trunks using the parameter CASTableIndex_x.
CASTablesNum Number, 1 to 8. Specifies how many CAS configuration files are loaded.
PrerecordedTonesFileName The name (and path) of the file containing the Prerecorded Tones.
UserInfoFileName The name (and path) of the file containing the User Information data.
SaveConfiguration Determines if the gateway’s configuration (parameters and files) is saved to
flash (non-volatile memory).
0 = Configuration isn’t saved to flash memory.
1 = Configuration is saved to flash memory (default).