3Com VCX V7122, Руководство пользователя

Страница: 52 / 488

52
V7122 GatewayUser Guide
Unpacking
To unpack the TP-1610:
1
Open the carton and remove packing materials.
2
Remove the TP-1610 board from the carton.
3
Check that there is no equipment damage.
4
Check, retain and process any documents.
5
Notify 3Com or your local supplier of any damage or discrepancies.
6
Retain any diskettes or CDs.
Package Contents
Ensure that in addition to the TP-1610, the package contains:
ƒ Optionally, an RTM module
ƒ CD (software and documentation)
ƒ This User Guide
ƒ
The V7122 Gateway Release Notes
Installing the TP-1610
The TP-1610 cPCI board is hot-swappable and can therefore be removed from a slot (and
inserted into a slot) while the chassis is under power. It is recommended though that you
power down the chassis and read the notes before replacing the components.
Before removing or inserting boards from / to the chassis, attach a wrist strap for
electrostatic discharge (ESD) and connect it to the rack frame using an alligator
clip.
Do not set components down without protecting them with a static bag.
Inserting Boards
To insert the TP-1610 board into the chassis:
1
Choose an available slot in a compactPCI™ chassis and gently insert the TP-1610 board
into it; as the TP-1610 board is inserted, the black plastic handles, at both ends of the
board’s front panel, must engage with the chassis. When the TP-1610 board is firmly
mounted into the correct position inside the chassis, the red plastic latches within each
handle self-lock (this also ensures that the TP-1610 board is properly earthed using the
chassis) and the blue hot-swap LED is lit.
2
Wait for the blue hot-swap LED to turn off, indicating that the board has been inserted
correctly and the power supply is functioning correctly.