3Com VCX V7122, Руководство пользователя, Страница: 55 / 488

V7122 Gateway User Guide
55
To install the TP-260:
1
Unpack the TP-260 (see Unpacking ).
2
Check the package contents (see Package Contents ).
3
Install the TP-260 in your PC (see Installing the TP-260 ).
4
Cable the TP-260 (see Cabling the TP-260 ).
When you have completed the above relevant sections you are then ready to start
configuring the gateway (See
1
Chapter 4: Getting Started ).
Unpacking
To unpack the TP-260:
1
Open the carton and remove packing materials.
2
Remove the TP-260 board from the carton.
3
Check that there is no equipment damage.
4
Check, retain and process any documents.
5
Notify 3Com or your local supplier of any damage or discrepancies.
6
Retain any diskettes or CDs.
Package Contents
Ensure that in addition to the TP-260, the package contains:
ƒ For the 8 span version only, four E1/T1 cable splitters (shown in Figure 19 ).
ƒ
CD (software and documentation).
ƒ This User Guide.
ƒ The V7122 Gateway Release Notes
Installing the TP-260
To install the TP-260 board:
1
End all applications running in the PC.
2
Shut down the PC, turn off the power, and remove the PC's cover.
3
Choose an available PCI slot and remove its blank rear bracket.