3Com VCX V7122, Руководство пользователя, Страница: 154 / 488

154
V7122 GatewayUser Guide
ini File Field Name
Web Parameter Name
Valid Range and Description
L1L1ComplexTxUDPPort
[RTP Multiplexing Local UDP Port]
Determines the local UDP port used for outgoing multiplexed
RTP packets (applies to the ThroughPacket™ mechanism).
The valid range is the range of possible UDP ports: 6,000 to
64,000.
The default value is 0 (ThroughPacket™ is disabled).
This parameter cannot be changed on-the-fly and requires a
gateway reset.
L1L1ComplexRxUDPPort
[RTP Multiplexing Remote UDP Port]
Determines the remote UDP port the multiplexed RTP
packets are sent to, and the local UDP port used for
incoming multiplexed RTP packets (applies to the
ThroughPacket™ mechanism).
The valid range is the range of possible UDP ports: 6000 to
64000.
The default value is 0 (ThroughPacket™ is disabled).
This parameter cannot be changed on-the-fly and requires a
gateway reset.
All gateways that participate in the same
ThroughPacket™ session must use the same
’L1L1ComplexRxUDPPort’.
NTPServerIP
[NTP Server IP Address]
IP address (in dotted format notation) of the NTP server.
The default IP address is 0.0.0.0 (the internal NTP client is
disabled).
For information on NTP support, see
Simple Network Time
Protocol Support .
NTPServerUTCOffset
[NTP UTC Offset]
Defines the UTC (Universal Time Coordinate) offset (in
seconds) from the NTP server.
The default offset is 0. The offset range is –43200 to 43200
seconds.
NTPUpdateInterval
[NTP Update Interval]
Defines the time interval (in seconds) the NTP client requests
for a time update.
The default interval is 86400 seconds (24 hours). The range
is 0 to 214783647 seconds.
It isn’t recommended to be set beyond one month
(2592000 seconds).
IP Routing Table parameters:
The IP routing ini file parameters are array parameters. Each parameter configures a specific column in the
IP routing table. The first entry in each parameter refers to the first row in the IP routing table, the second
entry to the second row and so forth.
In the following example two rows are configured when the gateway is in network 10.31.x.x:
RoutingTableDestinationsColumn = 130.33.4.6, 83.4.87.6
RoutingTableDestinationMasksColumn = 255.255.255.255, 255.255.255.0
RoutingTableGatewaysColumn = 10.31.0.1, 10.31.0.112
RoutingTableInterfacesColumn = 0, 1
RoutingTableHopsCountColumn = 20, 20
RoutingTableDestinationsColumn
Specifies the IP address of the destination host / network.
RoutingTableDestinationMasksColumn Specifies the subnet mask of the destination host / network.