3Com V6100, Руководство пользователя, Страница: 86 / 496

86
V6100 and V7122 User Guide
ƒ
Quick Setup – Use this menu to configure the gateway’s basic settings; for the full list of
configurable parameters go directly to ‘Protocol Management’ and ‘Advanced
Configuration’ menus. An example of the Quick Setup configuration is described in
Configuring the V7122 Basic Parameters .
ƒ
Protocol Management – Use this menu to configure the gateway’s control protocol
parameters and tables (see
Protocol Management ).
ƒ
Advanced Configuration – Use this menu to set the gateway’s advanced configuration
parameters (for advanced users only) (see
Advanced Configuration ).
ƒ
Status & Diagnostics – Use this menu to view and monitor the gateway’s channels,
Syslog messages, hardware / software product information, and to assess the gateway’s
statistics and IP connectivity information (see
Configuring the SNMP Managers Table ).
ƒ
Software Update – Use this menu when you want to load new software or configuration
files onto the gateway (see
Software Update Menu ).
ƒ
Save Configuration – Use this menu to save configuration changes to the non-volatile
flash memory (see
Save Configuration ).
ƒ
Reset – Use this menu to remotely reset the gateway. Note that you can choose to save
the gateway configuration to flash memory before reset (see
Save Configuration ).
When positioning your curser over a parameter name (or a table) for more than 1 second, a
short description of this parameter is displayed. Note that parameters preceded by an
exclamation mark (!) are
not changeable on-the-fly and require that the device be reset.
Saving Changes
To save changes to the volatile memory (RAM) click the Submit button (changes to
parameters with on-the-fly capabilities are immediately available, other parameter are
updated only after a gateway reset). Parameters that are only saved to the volatile memory
revert to their previous settings after hardware reset. When performing a software reset (i.e.,
via Web or SNMP) you can choose to save the changes to the non-volatile memory. To save
changes so they are available after a power fail, you must save the changes to the non-
volatile memory (flash). When Save Configuration is performed, all parameters are saved to
the flash memory.
To save the changes to flash, see Save Configuration .
Entering Phone Numbers in Various Tables
Phone numbers entered into various tables on the gateway, such as the Tel to IP routing
table, must be entered without any formatting characters. For example, if you wish to enter
the phone number 555-1212, it must be entered as 5551212 without the hyphen (-). If the
hyphen is entered, the entry does not work. The hyphen character is used in number entry
only, as part of a range definition. For example, the entry [20-29] means ‘all numbers in the
range 20 to 29’.