manualshive.com logo in svg

3Com V6100, Руководство пользователя, Страница: 290 / 496

Поделиться
Скачать
3Com V6100 Скачать руководство пользователя страница 290

290 

V6100 and V7122 User Guide

 

 

 

After the operational software runs, if DHCP is configured, the gateway attempts 
to renew its lease with the DHCP server. 

Though DHCP and BootP servers are very similar in operation, the DHCP server 
includes some differences that could prevent its operation with BootP clients. 
However, many DHCP servers, such as Windows

™

 NT DHCP server, are 

backward-compatible with BootP protocol and can be used for gateway 
configuration. 

The time duration between BootP/DHCP requests is set to 1 second by default. 
This can be changed by the BootPDelay 

ini

 file parameter. Also, the number of 

requests is 3 by default and can be changed by BootPRetries 

ini

 file parameter. 

(Both parameters can also be set using the BootP command line switches). 

Содержание V6100

















































































































































































































































































































































































































































































































Отзывы:

Нет отзывов