manualshive.com logo in svg

3Com V6100, Руководство пользователя, Страница: 215 / 496

Поделиться
Скачать
3Com V6100 Скачать руководство пользователя страница 215

V6100 and V7122 User Guide

  

215 

ini File Field Name 
Web Parameter Name 

Valid Range and Description 

ReplaceEmptyDstWithPort
Number 

[Replace Empty Destination 
with Port Number] 

0 = Disabled (default). 
1 = Enabled, Internal channel number is used as a destination number if 
called number is missing. 

 

Applicable only to Tel

Æ

IP calls, if called number is missing. 

 

CopyDestOnEmptySource 

0 = Leave Source Number empty (default). 
1 = If the Source Number of an incoming Tel to IP call is empty, the 
Destination Number is copied to the Source Number. 

AddNPIandTON2CallingNu
mber 

[Add NPI and TON to Calling 
Number]

 

0 = Do not change the Calling Number (default). 
1 = Add NPI and TON to the Calling Number of incoming (Tel to IP) ISDN 
call. 
For example: After receiving a Calling Number = 555, NPI = 1 and TON = 3, 
the modified number is going to be 13555. This number can later be used for 
manipulation and routing purposes. 

AddNPIandTON2CalledNu
mber 

[Add NPI and TON to Called 
Number]

 

0 = Do not change the Called Number (default). 
1 = Add NPI and TON to the Called Number of incoming (Tel to IP) ISDN 
call. 
For example: After receiving a Called Number = 555, NPI=1 and TON = 3, 
the modified number is going to be 13555. This number can later be used for 
manipulation and routing purposes. 

UseSourceNumberAsDispl
ayName

 

[Use Source Number as 
Display Name]

 

Applicable to Tel

Æ

IP calls. 

0 = The Tel Source Number is used as the IP Source Number and the Tel 
Display Name is used as the IP Display Name (if Tel Display Name is 
received). If no Display Name is received from the Tel side, the IP Display 
Name remains empty (default). 
1 = If a Tel Display Name is received, the Tel Source Number is used as the 
IP Source Number and the Tel Display Name is used as the IP Display 
Name. If no Display Name is received from the Tel side, the Tel Source 
Number is used as the IP Source Number and also as the IP Display Name.
2 = The Tel Source Number is used as the IP Source Number and also as 
the IP Display Name (even if the received Tel Display Name is not empty). 

UseDisplayNameAsSource
Number

 

[Use Display Name as 
Source Number]

 

Applicable to IP

Æ

Tel calls. 

0 = The IP Source Number is used as the Tel Source Number and the IP 
Display Name is used as the Tel Display Name (if IP Display Name is 
received). If no Display Name is received from IP, the Tel Display Name 
remains empty (default). 
1 = If an IP Display Name is received, it is used as the Tel Source Number 
and also as the Tel Display Name, the Presentation is set to Allowed (0). If 
no Display Name is received from IP, the IP Source Number is used as the 
Tel Source Number and the Presentation is set to Restricted (1). 
For example: 
When the following is received ’from: 100 <sip:[email protected]>’, the 
outgoing Source Number and Display Name are set to ’100’ and the 
Presentation is set to Allowed (0). 
When the following is received ‘from: <sip:[email protected]>’, the 
outgoing Source Number is set to ‘100’ and the Presentation is set to 
Restricted (1). 

Содержание V6100

















































































































































































































































































































































































































































































































Отзывы:

Нет отзывов