3Com V6100, Руководство пользователя, Страница: 164 / 496

164
V6100 and V7122 User Guide
ini File Field Name
Web Parameter Name
Valid Range and Description
LocalControlIPAddress
[IP Address]
The gateway’s source IP address in the Control network.
The default value is 0.0.0.0.
LocalControlSubnetMask
[Subnet Mask]
The gateway’s subnet mask in the Control network.
The default subnet mask is 0.0.0.0.
LocalControlDefaultGW
[Default Gateway Address]
N/A.
Use the IP Routing table instead (Advanced Configuration >
Network Settings).
LocalOAMIPAddress
[IP Address]
The gateway’s source IP address in the OAM network.
The default value is 0.0.0.0.
LocalOAMSubnetMask
[Subnet Mask]
The gateway’s subnet mask in the OAM network.
The default subnet mask is 0.0.0.0.
LocalOAMDefaultGW
[Default Gateway Address]
N/A.
Use the IP Routing table instead (Advanced Configuration >
Network Settings).
PPPoE Parameters
EnablePPPoE Enables the PPPoE (Point-to-Point Protocol over Ethernet)
feature.
0 = Disable (default)
1 = Enable
PPPoEUserName User Name for PAP or Host Name for CHAP authentication.
The valid range is a string of up to 47 characters. The default
value is 0.
PPPoEPassword Password for PAP or Secret for CHAP authentication.
The valid range is a string of up to 47 characters. The default
value is 0.
PPPoEServerName
Server Name for CHAP authentication.
The valid range is a string of up to 47 characters. The default
value is 0.
PPPoEStaticIPAddress IP address to use in a static configuration setup. If set, used
during PPP negotiation to request this specific IP address
from the PPP server. If approved by the server, this IP
address is used during the session.
The valid IP address range is in dotted notation
xxx.xxx.xxx.xxx. The default value is 0.0.0.0.
PPPoERecoverIPAddress IP address to use when booting from the flash to non-PPPoE
(Point-to-Point Protocol over Ethernet) environments.
The valid IP address range is in dotted notation
xxx.xxx.xxx.xxx. The default value is 10.4.10.4.