3Com V6100, Руководство пользователя, Страница: 368 / 496

368
V6100 and V7122 User Guide
An alternative to the above procedure is to set the tgtAddressMask column while you are
creating other rows in the table.
To delete a Trusted Manager (not the final one):
(The following procedure assumes that there is at least one configured read-write
community. There are currently two or more Trusted Managers. The taglist for columns for all
rows in the srCommunityTable are currently set to MGR. This procedure must be performed
from one of the existing trusted managers, but not the one that is being deleted.
ƒ
Remove the appropriate row from the snmpTargetAddrTable.
The change takes effect immediately. The deleted trusted manager cannot access the
device. The agent automatically removes the row in the tgtAddressMaskTable.
To delete the final Trusted Manager:
(The following procedure assumes that there is at least one configured read-write
community. There is currently only one Trusted Manager. The taglist for columns for all rows
in the srCommunityTable are currently set to MGR. This procedure must be performed from
the final Trusted Manager.
1 Set the value of the TransportLabel field on each row in the srCommunityTable to the
empty string.
2 Remove the appropriate row from the snmpTargetAddrTable
The change takes effect immediately. All managers can now access the device.
SNMP Ports
The SNMP Request Port is 161 and the Trap Port is 162. These ports can be changed by
setting parameters in the device
ini file. The parameter name is:
SNMPPort = <port_number>
Valid UDP port number; default = 161
This parameter specifies the port number for SNMP requests and responses. Usually, it
should not be specified. Use the default.
Multiple SNMP Trap Destinations
An agent can send traps to up to five managers. For each manager, set the manager’s IP
address, receiving port number and enable sending traps to that manager.