3Com V6100, Руководство пользователя, Страница: 218 / 496

218
V6100 and V7122 User Guide
ini File Field Name
Web Parameter Name
Valid Range and Description
NumberMapIP2Tel
[Destination Phone Number
Manipulation Table for
IP
Æ
Tel calls]
Manipulate the destination number for IP to Tel calls.
NumberMapIP2Tel = a,b,c,d,e,f,g,h,i
a
= Destination number prefix
b = Number of stripped digits from the left, or (if brackets are used)
from the right. A combination of both options is allowed.
c
= String to add as prefix, or (if brackets are used) as suffix. A
combination of both options is allowed.
d
= Number of remaining digits from the right
e = Q.931 Number Plan
f = Q.931 Number Type
g = Source number prefix
h = Not applicable, set to $$
i = Source IP address (obtained from the Contact header in the
INVITE message)
The ‘b’ to ‘f’ manipulation rules are applied if the called and calling numbers
match the ‘a’, ‘g’ and ‘i’ conditions.
The manipulation rules are executed in the following order: ‘b’, ‘d’ and ‘c’.
Parameters can be skipped by using the sign ‘$$’, for example:
NumberMapIP2Tel =01,2,972,$$,0,$$,034
NumberMapIP2Tel =03,(2),667,$$,$$,0,22,$$,10.13.77.8
The Source IP address can include the ‘x’ wildcard to represent
single digits. For example: 10.8.8.xx represents all the
addresses between 10.8.8.10 to 10.8.8.99.
SourceNumberMapTel2IP
[Source Phone Number
Manipulation Table for
Tel
Æ
IP calls]
SourceNumberMapTel2IP = a,b,c,d,e,f,g,h
a
= Source number prefix
b = Number of stripped digits from the left, or (if in brackets are used)
from right. A combination of both options is allowed.
c
= String to add as prefix, or (if in brackets are used) as suffix. A
combination of both options is allowed.
d
= Number of remaining digits from the right
e = Number Plan used in RPID header
f = Number Type used in RPID header
g =Destination number prefix
h =Calling number presentation (0 to allow presentation, 1 to restrict
presentation)
The ‘b’ to ‘f’ and ‘h’ manipulation rules are applied if the called and calling
numbers match the ‘a’ and ‘g’ conditions.
The manipulation rules are executed in the following order: ‘b’, ‘d’ and ‘c’.
Parameters can be skipped by using the sign ‘$$’, for example:
SourceNumberMapTel2IP=01,2,972,$$,0,0,$$,1
SourceNumberMapTel2IP=03,(2),667,$$,0,0,22,0