3Com V6100, Руководство пользователя, Страница: 69 / 496

V6100 and V7122 User Guide
69
To install the TP-260:
1 Unpack the TP-260 (see Unpacking ).
2 Check the package contents (see Package Contents ).
3 Install the TP-260 in your PC (see Installing the TP-260 ).
4 Cable the TP-260 (see Cabling the TP-260 ).
When you have completed the above relevant sections you are then ready to start
configuring the gateway (See
1
Chapter 4: Getting Started ).
Unpacking
To unpack the TP-260:
1
Open the carton and remove packing materials.
2
Remove the TP-260 board from the carton.
3 Check that there is no equipment damage.
4 Check, retain and process any documents.
5 Notify 3Com or your local supplier of any damage or discrepancies.
6 Retain any diskettes or CDs.
Package Contents
Ensure that in addition to the TP-260, the package contains:
ƒ
For the 8 span version only, four E1/T1 cable splitters (shown in Figure 31 ).
ƒ
CD (software and documentation).
ƒ
This User Guide.
ƒ
The Mediant & TP Series SIP Digital Gateways Release Notes
Installing the TP-260
To install the TP-260 board:
1 End all applications running in the PC.
2
Shut down the PC, turn off the power, and remove the PC's cover.
3
Choose an available PCI slot and remove its blank rear bracket.