3Com OfficeConnect 3CP4144, Руководство пользователя CLI

Страница: 112 / 144

B-32 A
PPENDIX
B: CLI COMMAND DESCRIPTION
■
transmit_authentication_name [name]
Specifies system contact information, which is displayed using show system . The
user name is the remote account name. Location , name and contact names are
limited to 64 characters.
from managers on the network must match the list, which you can see using list
snmp communities .
set syslog <IP_address>
loglevel [level
]
Sets the error reporting level for syslog entries that will be sent to the specified IP
address. You must have previously defined this syslog IP address using
add syslog .
There are five levels of logging:
■
CRITICAL - a serious system error, which may effect system integrity
■
UNUSUAL - an abnormal event, which the system should recover from
■
COMMON - a regularly occurring event that is not frequent
■
VERBOSE - a regular periodic event, e.g. a routing update message
■
DEBUG - for debugging only
set time <time>
Sets the system time, and leaves the date unchanged. Use show date to see what
the current settings are. The format is: hh:mm:ss. The seconds field is optional.
set user <user_name>
■
message [“message”]
■
password [password]
■
session_timeout [seconds]
■
tcp_port [tcp_port]
■
terminal_type
Modifies user parameters.
set vc <vc_name>
■
address_selection [negotiate | assign | specified]
Parameters Description
name A name identifying the user to the system.
location The location of the user.
contact The information contact for the user.
transmit_
authentication_name Deprecated
Parameters Description
<user_name> Name of user, previously defined using add user . Limit of 32 characters.
message Message presented to a dial-in user.
password User’s password, up to 15 ASCII characters. Value is required.
session_timeout Interval before timing out a session.
tcp_port TCP Port number for the Telnet session.
Terminal_type The type of terminal. This is an alphanumeric string, of up to 64 characters.