3Com OfficeConnect 3CP4144, Руководство пользователя CLI

Страница: 17 / 144

2
CLI C
OMMAND
C
ONVENTIONS AND
T
ERMINOLOGY
This chapter describes the command syntax, conventions and terminology used
within the Command Line Interface. Reviewing and understanding this chapter is
essential for you to understand subsequent chapters.
Command
Structure
Format
Commands can be followed by values and/or parameters and values. For example:
a
dd ip network <network_name>
address [ip_addr]
{ interface [eth:1] }
■
add ip network is the command
■
<network_name> is the (required) value for the command
■
address is a required parameter
■
[ip_addr] is the value for the IP address parameter which you must provide
■
interface is only required if you want to override the default value, which is
eth:1
Parameters
■
are order independent
■
{ … } parameters enclosed by curly braces are required, and are provided with
default values. You do not need to specify these parameters unless you wish to
override the default.
Values
■
< … > required values for a command or parameter are enclosed by arrows.
■
[ … ] range of values following parameters are enclosed in brackets. Inside the
brackets, if you see a:
■
| (vertical bar) you may select only one of the displayed choices:
[FIRST | SECOND | THIRD]
■
, (comma) you can select one or more of the displayed choices:
[FIRST,SECOND,THIRD,...]
■
The type of value you enter must match the type requested. Numbers are
either decimal or hexadecimal. Text can be either a string that you create, or it